Pushrod, Chrome Moly Honda GX390 Pushrod Cut To Fit
- In stock, ready to ship
- Inventory on the way
Heavy Duty Chrome Moly Push rods. Considerably stiffer than stock. Use with all HD springs. Capable of 10,000 RPM +
ALL PUSH RODS ARE SOLD INDIVIDUALLY. YOU MUST ORDER 2 PER MOTOR
The following are recommendations only and may not work for all applications. See notes for regarding pushrod length.
GX240/270s
5.720 Stock Length; Use with stamped Rocker Arms
5.620 (-.100); Use with Billet & Roller Rocker Arms
GX340/390, 13/15hp Clones, & 420 Predator OHV (non-Hemi)
6.540 Stock Length; Use with stamped Rocker Arms
6.440 (-.100); Use with Billet & Roller Rocker Arms
420 Hemi Predators
7.00"
Kit; Pushrods, Chrome Moly, Unfinished, Must be cut to length, Includes tube and two ends
Note: Due to differences in cam base circles, deck heights, head milling, gasket thickness, etc. actual push rod length can vary. Pushrods are sold for the experienced engine builder. We recommend you assemble the motor first and then determine correct pushrod length. One of the best ways is to grind a stock pushrod until you get correct geometry, measure, and order one closest to that size.
Depending on availability, Pushrods may be black anodized or uncoated
ALL PUSH RODS ARE SOLD INDIVIDUALLY. YOU MUST ORDER 2 PER MOTOR
The following are recommendations only and may not work for all applications. See notes for regarding pushrod length.
GX240/270s
5.720 Stock Length; Use with stamped Rocker Arms
5.620 (-.100); Use with Billet & Roller Rocker Arms
GX340/390, 13/15hp Clones, & 420 Predator OHV (non-Hemi)
6.540 Stock Length; Use with stamped Rocker Arms
6.440 (-.100); Use with Billet & Roller Rocker Arms
420 Hemi Predators
7.00"
Kit; Pushrods, Chrome Moly, Unfinished, Must be cut to length, Includes tube and two ends
Note: Due to differences in cam base circles, deck heights, head milling, gasket thickness, etc. actual push rod length can vary. Pushrods are sold for the experienced engine builder. We recommend you assemble the motor first and then determine correct pushrod length. One of the best ways is to grind a stock pushrod until you get correct geometry, measure, and order one closest to that size.
Depending on availability, Pushrods may be black anodized or uncoated