Dyno Cams Camshaft BP2 Grind, 196cc, Predator Hemi
This cam meets lift requirements for stock but has a lot of extra duration producing better horsepower over a broader RPM range. Stock setup can be used, but works even better as a modified cam. This cam will easily allow your motor to turn up into the higher RPM range and will require upgraded spring package if your exhaust and intake systems are upgraded. Billet rod and flywheel required for safety if engine is modified.
The lobes are hardened for extra durability, extending the life of this cam.
Engine: 196cc OHV Clone, 212cc Hemi Predator
Recommended Class: Builder's Prepared
Target (MAX) RPM: 7000+
Spring Pressure (In / Ex): 26 lbs
Valve Lash (In/Ex): .003"
Ignition Timing: 32 Deg BTDC
Open: 39.0 BTDC 78.0 BBDC
Close: 76.5 ABDC 36.0 ATDC
Lift: .224" .231"
C/L: 109.0 ATDC 111.0 BTDC
DUR @ 50: 246.5 Deg 245.5 Deg